Choosing A Location - Ricoh J012 Service Manual

Preparation
1.1.2

CHOOSING A LOCATION

1. Always install the machine:
On a sturdy, level surface.
Where it will not be exposed to either very low or very high humidity.
2. Make sure the machine is never exposed to:
Extreme changes from low to high temperature or high to low temperature.
Cold or cool air directly from an air conditioner.
Heat from a space heater.
3. Never install the machine in areas near:
Dust, lint, or corrosive fumes.
Strong vibration.
4. Do not use the machine at any location higher than 2,000 m (6,500 ft) above sea level.
5. Set up and use the machine on a sturdy, level surface.
Place a carpenter's level on the machine front-to-back, and side-to-side and confirm
that it is level.
Variations between the front/back and left/right level readings should be less than 2
degrees.
J012/J013/J014
CÓPIA NÃO CONTROLADA
1-2
CÓPIA NÃO CONTROLADA
SM