Ricoh J012 Service Manual page 108

Common Procedures
5. Pull the fan connector harness [1] out of its L-clamp.
6. Disconnect the fan harness connector [2] (
7. Remove fan bracket screws [3] and [4] then remove the fan ( x2).
8. Raise the latch and remove the right front door sensor [1].
9. Remove the harness [2] of the right front door sensor from the clamps (
10. Under the right front corner of the inner cover [1] remove the screws ( x2).
11. Separate the corner of the inner cover [2] from the top cover [3].
12. Slide the right inner cover forward to remove it.
J012/J013/J014
CÓPIA NÃO CONTROLADA
x1).
3-20
CÓPIA NÃO CONTROLADA
x3).
SM