3.2.12 LEFT COVER
Preparation
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray (
1.
Use the tip of a small flat-head screwdriver to press and release tabs [1] and [2] at the
front and tab [3] at the top rear corner.
2.
Carefully remove the left cover to prevent damaging the other tabs on the top and
bottom edges of the cover.
3.2.13 FRONT COVER
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
3-21
CÓPIA NÃO CONTROLADA
Common Procedures
3.2.8)
J012/J013/J014