Ricoh J012 Service Manual page 26

Reference Material for Maintenance
Maintenance shall be done with the special tools and the procedures prescribed for
maintenance of the machine described in the reference materials (service manuals,
technical bulletins, operating instructions, and safety guidelines for customer engineers).
Use only consumable supplies and replacement parts designed for use with the
relevant machine.
Before Installation, Maintenance
Shipping and Moving the Machine
Work carefully when lifting or moving the machine. If the machine is heavy, two or
more customer engineers may be required to prevent injuries (muscle strains,
spinal injuries, etc.) or damage to the machine if it is dropped or tipped over.
Personnel moving or working around the machine should always wear proper
clothing and footwear. Never wear loose fitting clothing or accessories (neckties,
loose sweaters, bracelets, etc.) or casual footwear (slippers, sandals, etc.) when
lifting or moving the machine.
Always unplug the power cord from the power source before you move the machine.
Before you move the machine, arrange the power cord so it will not fall under the
machine.
Power
Always turn the machine off and disconnect the power plug before doing any
maintenance procedure. After turning the machine off, power is still supplied to the
main machine and other devices. To prevent electrical shock, switch the machine
off, wait for a few seconds, and then unplug the machine from the power source.
Before you do any checks or adjustments after turning the machine off, work
carefully to avoid injury. After removing covers or opening the machine to do checks
or adjustments, avoid touching electrical components or moving parts (gears, timing
belts, etc.).
After turning the machine on with any cover removed, keep your hands away from
electrical components and moving parts. Never touch the cover of the fusing unit,
gears, timing belts, etc.
CÓPIA NÃO CONTROLADA
CÓPIA NÃO CONTROLADA