Table of Contents
Advertisement
3.4 MAINTENANCE UNIT
Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) right cover (
The bottom edges of the maintenance unit are covered with ink. Spread a cloth or a
sheet of paper to set the unit after it is removed. Avoid touching the bottom of the
maintenance unit.
1.
To unlock the carriage use a plus (+) screwdriver to turn the screw [1] counter-clockwise
until the tips of the triangles [2] align.
2.
Push the envelope selector [3] to the rear.
Pushing the envelope selector to the rear raises the print head unit. This prevents
damaging the print head unit when the carriage is moved manually.
Always push the envelope selector to the rear before you move the carriage
manually.
3.
Push the carriage [4] to the left side of the machine.
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
3-31
CÓPIA NÃO CONTROLADA
Maintenance Unit
3.2.8, 3.2.10)
J012/J013/J014
Hide quick links:
Advertisement
Table of Contents
