Horizontal Encoder Strip - Ricoh J012 Service Manual

Encoders
3.5.2

HORIZONTAL ENCODER STRIP

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) scanner unit, (2) left cover, (3) right cover, (4) rear cover
( 3.2.14, 3.2.12, 3.2.10, 3.2.15)
The carriage is locked when the triangles [A] and [B] are at the positions shown on the left.
1. Insert the tip of a plus (+) screwdriver into the hole at [C] and turn in counter-clockwise
until the triangles [A] and [B] are aligned as shown on the right.
2. Push the carriage unit [1] to the center of the machine.
J012/J013/J014
CÓPIA NÃO CONTROLADA
3.2.$, 3.2.5)
3.2.7)
3-36
CÓPIA NÃO CONTROLADA
SM