Duplexer Set Switch - Ricoh J012 Service Manual

6.11.4 DUPLEXER SET SWITCH

The Duplex Unit set switch [1], a micro-switch in the printer, detects the presence of the
Duplex Unit.
This occurs when the Duplex Unit is installed correctly on the back of the printer:
The unit the set lever [2] depresses the Duplex Unit set switch. Then it turns it on.
The printer signals an error (Paper Jam – Type 1) at these times:
The Duplex Unit is not installed correctly
The set lever has not fully depressed the Duplex Unit set switch
The duplex unit is not an option for this printer.
The duplex unit must be installed at all times in order for the printer to operated
properly.
SM
CÓPIA NÃO CONTROLADA
6-73
CÓPIA NÃO CONTROLADA
Duplex Unit
J012/J013/J014