Motors; Horizontal Motor - Ricoh J012 Service Manual

3.7 MOTORS

3.7.1

HORIZONTAL MOTOR

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) right cover, (4) left cover, (5)
scanner unit, (6) rear cover (
1. Gently (to avoid bending) push the leaf spring [1] to the right to release pressure on the
horizontal encoder strip, then disconnect both ends of the strip and remove it.
2. Remove screws [2] and [3].
3. At the rear corner of the printer, remove the horizontal motor [4] (
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
3.2.8, 3.2.10, 3.2.12, 3.2.7, 3.2.15)
3-45
CÓPIA NÃO CONTROLADA
Motors
x1).
J012/J013/J014