Ricoh J012 Service Manual page 113

Create a folder to hold the file or navigate to another target folder, enter a filename of
your choice or use the default filename "NewFile.dat" and save it.
4. Follow the procedure below to replace the scanner unit.
Preparation for Removal
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) right cover, (3) left cover
( 3.2.49, 3.2.10, 3.2.12)
1. At the left front corner of the machine, disconnect the scanner power cable harness[1]
CN4 from the PSU (
2. Pull the harness out from behind the four L-clamps.
3. At the left rear corner of the machine, release the harness [2] from the white harness
clamps ( x3).
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
x1).
3-25
CÓPIA NÃO CONTROLADA
Common Procedures
J012/J013/J014