Boards; Psu - Ricoh J012 Service Manual

Boards

3.6 BOARDS
3.6.1

PSU

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) left cover (
1. Disconnect the connectors [1] (
2. Remove PSU board screws [2], [3], [4], [5] ( x4).
A plastic corner cap is attached at [2]. Remove it from the machine if it falls off.
3. Release the tab [6] then remove the PSU.
J012/J013/J014
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
x4).
3-38
CÓPIA NÃO CONTROLADA
3.2.8, 3.2.12)
SM