Ricoh J012 Service Manual page 215

"*Please Wait*" displays until pattern printing is finished. Do not start any other
operation until printing stops.
5. Check the printed numbers and patterns.
The adjustment value appears to the left of the lightest gray square with straight
horizontal lines on both sides.
If this number is "+2", for example, then the adjustment value is "+2."
If horizontal lines beside the gray square are broken, look at where the lines are
broken in the opposite direction.
For example, if the "+2" square is the lightest gray square and the "+6" lines are
broken, then the best adjustment value is between "+3" and "+5."
6. [ ] > "Adjust" > [Yes]
SM
CÓPIA NÃO CONTROLADA
4-49
CÓPIA NÃO CONTROLADA
Image Correction
J012/J013/J014