Common Procedures
3.2 COMMON PROCEDURES
3.2.1
NETWORK INTERFACE BOARD (NIB)
This procedure applies to the J012/J013 only. The NIB is built into the J014.
1.
Press down on the tab release [1].
2.
Pull the NIB out of the machine.
3.2.2
DUPLEX UNIT
1.
Raise the left and right release tabs [1] and [2] together to unlock the duplex unit.
2.
Pull the duplex unit [3] out of the machine.
Reinstallation
The duplex unit must be installed in the machine at all times, even for simplex printing.
The machine will not operate without the duplex unit.
Reinstall the duplex unit carefully to avoid bending the contact pins.
J012/J013/J014
CÓPIA NÃO CONTROLADA
3-10
CÓPIA NÃO CONTROLADA
SM