Paper Feed Jams - Ricoh J012 Service Manual

Paper Feed Jams

Jam 1 Paper Misfeed in Paper Cassette(Failure to Feed: Tray 1)
Message: Paper Misfeed: Tray 1
Paper late jam. The trailing edge sensor failed to detect the trailing edge of
Jam
a sheet.
Obstruction at TE sensor, or obstruction at TE sensor
Bottom plate, bottom plate spring obstructed or damaged.
Cause:
Paper path blocked by obstruction
Trailing edge sensor feeler obstructed or damaged
Paper cassette (standard)
Trailing edge sensor
Problem Site
Paper feed clutch
CTL board
Perform check, take action in this order:
1. Check Tray 1 (standard paper cassette) for damaged parts and
replace them.
Action
2. Check area around trailing edge sensor for obstruction and remove it.
3. Replace paper cassette friction pad.
4. Check paper feed clutch and replace if damaged.
Jam 2 Paper Misfeed in PFU (Failure to Feed: Tray 2)
Message: Paper Misfeed: Tray 2
Jam Paper did not arrive at the relay sensor, so no signal from relay sensor
Cause: Feeler of relays sensor failed to return to its correct position
Optional PFU (Tray 2)
Problem Site
CTL board
Perform check, take action in this order:
Action
1. Inspect PFU for faulty parts and replace.
SM
CÓPIA NÃO CONTROLADA
4-29
CÓPIA NÃO CONTROLADA
SC Error Codes
J012/J013/J014