Cleaning Procedures - Ricoh J012 Service Manual

Cleaning Procedures

3.10 CLEANING PROCEDURES
The responsibility of the service technician is limited because this machine is adjusted for
optimum performance at the factory before it is shipped.
Return the printer to the repair center or replace the machine if a serious problem occurs.
There are no parts that require scheduled maintenance or replacement. However, the
service technician should do the procedures described in this section when a service call is
requested.
Description
External Covers
Feed Roller
Friction Pad
Printer Operation, Print
Quality
Ink Collector Tank
Flushing Unit Gate
Maintenance unit
J012/J013/J014
CÓPIA NÃO CONTROLADA
At Service Call (or When Necessary)
Damp cloth.
Damp cloth. Release the feed clutch lock. Rotate the roller
freely as you clean it.
Damp cloth. This is the cork friction pad on the front edge of the
standard paper cassette (Tray 1).
Print a Nozzle Check Pattern and check the results. Clean the
print heads if necessary. For more, see "Image Adjustment" "3.
Replacement and Adjustment."
A message on the printer operation panel prompts you to
replace the ink collector unit after it has become full.
For more, see "3. Replacement and Adjustment."
Dry cloth. Always remove the ink that has hardened around the
flushing gate slots when you replace the ink collector tank. To
scrape away hardened ink, you may need to use a small
screwdriver
Wet cloth (use water). Always use a tightly wrapped dry cloth to
remove the ink that has hardened around the suction cap and
wiper blade when you replace the ink collector tank.
3-60
CÓPIA NÃO CONTROLADA
SM