Ricoh J012 Service Manual page 228

Quick Reference
Power Off
Power On
Print Head Position
Print Head: Washing
(Before Long Storage)
J012/J013/J014
CÓPIA NÃO CONTROLADA
7. [ ] or [ ] > Select the size of paper that will be
loaded in Tray 1
8. [Yes]> "Tray Paper Setting?"
[Power] Power LED flashes then goes out
[Power] Power LED flashes until warm-up finishes, then
lights and remains on.
1. [Menu]> "System Settings?"
2. [ ] or [ ] > "Maintenance?" > [Yes]> "1 Nozzle
Check?"
3. [ ] or [ ] > "4 Head Position?"
4. For more see "Head Position" in "4. Troubleshooting."
1. Enter the SP mode
2. Select SP5007 and switch it on.
3. Open the right front door.
4. Remove the print cartridges and replace them with the
cleaning cartridges.
5. Close the right front door.
6. Confirm that "WASHING" and "EXEC" are displayed,
then push [Yes].
7. When you see "OK?" push [Yes].
8. "RUNNING" displays while the cleaning sequence
executes.
For more see "Cleaning the Print Heads Before Long
Term Storage" in "4. Troubleshooting."
4-62
CÓPIA NÃO CONTROLADA
SM