Ink Level Sensor - Ricoh J012 Service Manual

Sensors
3.8.3

INK LEVEL SENSOR

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) right cover (
1. Remove the bracket screws [1], [2] ( x2)
2. Remove the air release solenoid screws [3], [4] ( x2).
3. Remove the air release solenoid [5].
4. Disconnect the sensor from the bracket frame (
5. Release the sensor tabs [6].
6. Pull out the sensor [7] and disconnect it.
J012/J013/J014
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
3-54
CÓPIA NÃO CONTROLADA
3.2.8, 3.2.10)
x1).
SM