Ricoh J012 Service Manual page 220

Image Correction
SP No.
1000
3. [ ] 4 times> "5000"> [Yes]
4. [ ] 3 times> "5300"> [Yes]> [Yes]
5. [ ] 1 time> "5301"> [Yes]
ENGINE SW1
5301
6. [Yes]
ENG SW1 00001001
Bit0 _
7. Set Bit1 to "1"
[ ] to move the cursor to Bit1 (2nd position from right)> [Yes]
[ ] to toggle the setting to "1"> [Yes].
ENG SW1 00001011
Bit0 _
8. [No] 3 times > [ ] or [
9. [Power] to switch the machine on.
10. Pull the release under the operation panel forward and raise the scanner unit.
11. Confirm that the envelope selector is forward.
12. [Menu]> "System Settings?"
13. [ ] or [ ] > "Maintenance" > [Yes]> "1 Nozzle Check?"
14. [ ] or [ ] > "2 Head-flushing>" > [Yes]> "All Heads"
15. [ ] or [ ] > Select the print heads to be flushed: "All" (all print heads), "Print-head 1"
(Black/Cyan), "Print-head 2" (Magenta/Yellow") > [Yes]
"*Please Wait*" displays until flushing is finished. Do not start any other operation until
cleaning stops.
J012/J013/J014
CÓPIA NÃO CONTROLADA
] > "End" > [Yes] > Machine switches off.
4-54
CÓPIA NÃO CONTROLADA
SM