Common Procedures
3.2.5
ADF. (J013/J014)
This procedure applies to the J013/J014.
1.
Loosen the knob screws (x2) of the ADF. connector [1] and disconnect it.
2.
Raise the ADF. [2] while tilting it slightly toward the back of the machine to disengage
the feet of the ADF.
3.
Raise the feet out of the holes and remove the ADF.
J012/J013/J014
CÓPIA NÃO CONTROLADA
3-14
CÓPIA NÃO CONTROLADA
SM