Procedure Summary - Ricoh J012 Service Manual

Before Replacing Parts
3.1.3

PROCEDURE SUMMARY

The reference table below is a list of components in alphabetic order.
The left column lists the item to be removed.
The right column tells you what other parts must be removed before the item in the left
column can be removed. Before you use this table for reference, you must be familiar
with the procedures described "Common Procedures" (the next section).
There is a detailed description in this service manual for every item listed in the left
column. Be sure to refer to the appropriate section of the manual for more details.
No prior procedures are required for items marked "---" in the right column.
To remove:
1st Registration Sensor
2nd Registration Sensor
ADF. (J013/J014)
Air Release Solenoid
CTL Board, NVRAM
Carriage Position Sensor
Cleaning – Feed Roller
Cleaning – Flushing Gate
Cleaning – Friction Pad
J012/J013/J014
CÓPIA NÃO CONTROLADA
First, remove in this order:
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Right Front Cover, 5) Right
Cover, 6) Right Inner Cover, 7) Left Cover, 8) Front
Cover
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Right Cover, 5) Left Cover, 6)
Scanner Unit, 7) Rear Cover
1) Platen or ADF., 2) Scanner Unit to Upright, 3) Paper
Cassette, Output Tray, 4) Right Cover
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Right Cover, 5) Left Cover, 6)
Scanner Unit, 7) Rear Cover
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Right Cover
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray
1) Platen or ADF., 2) Scanner to Full Upright
3-6
CÓPIA NÃO CONTROLADA
---
---
SM