Encoders; Vertical Encoder Wheel - Ricoh J012 Service Manual

3.5 ENCODERS

3.5.1

VERTICAL ENCODER WHEEL

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) left cover (
1. Release the scanner unit power harness [1] (
2. Remove screws [2], [3], [4], [5] on the side of the vertical stay ( x4).
3. Remove the screw [6] on top of the vertical stay ( x1).
4. Disconnect the spring [7] to release the tension on the timing belt.
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
x1).
3-33
CÓPIA NÃO CONTROLADA
Encoders
3.2.8, 3.2.12)
J012/J013/J014