To remove:
Right Inner Cover
Scanner CTL Board, NCU
Scanner Unit
Scanner Unit Sensor (Platen
Sensor)
Scanner to Full Upright
Vertical Encoder Sensor
Vertical Encoder Wheel
Vertical Motor
SM
CÓPIA NÃO CONTROLADA
First, remove in this order:
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Right Front Cover, 5) Right
Cover
Swap the Scanner Unit. See "Scanner Unit" in this table.
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Right Cover, 5) Left Cover
Note: If scanner unit will be replaced, download address
book data to a computer with the Device Setting Utility.
After replacement upload address book data to new
scanner unit.
1) ADF., 2) Scanner to Full Upright, 3) Paper Cassette,
Output Tray, 4) Right Front Cover, 5) Right Cover, 6)
Right Inner Cover, 7) Front Cover, 8) Front Cover
1) Platen or ADF.
1) Platen or ADF., 2) Scanner to Full Upright, 2) Paper
Cassette, Output Tray, 3) Left Cover
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Left Cover
1) Platen or ADF., 2) Scanner to Full Upright, 3) Paper
Cassette, Output Tray, 4) Left Cover
3-9
CÓPIA NÃO CONTROLADA
Before Replacing Parts
J012/J013/J014