Registration - Ricoh J012 Service Manual

7. [ ] > "Adjust" > [Yes].
*A B C
, & Yes
8. [ ] or [ ] > Select letter for the row (A, B, C)> [Yes]
Adj=0
OK=Yes
9. [ ] or [ ] > Select the number for the column
to select a + value
to select a – value
10. [Yes] > "Adjust"
11. [No] > "Cancel?" > [Yes]> Standby
4.5.7

REGISTRATION

Do this procedure to adjust the print start position. The print start position is the point at the
upper left corner of each sheet where printing begins. This procedure can be done for all the
paper feed sources: Tray 1 (Standard), Tray 2 (Option), Multi-Bypass Tray (Option).
1. [Menu]> "System Settings?"
2. [ ] or [ ] > "Maintenance?" > [Yes]> "1 Nozzle Check?"
3. [ ] or [ ] > "6 Registration" > [Yes].
4. [ ] or [ ] > "Print Test Pattern?" > [Yes].
5. [ ] or [ ] > Select the paper tray ("Tray 1", "Tray 2" or "Bypass") > [Yes].
"Tray 2" and "Bypass" do not appear unless these options have been
installed. .
6. [ ] or [ ] > Select the type of paper loaded in the tray ("Plain, "Glossy", "Transparency",
etc) [Yes].
"*Please Wait*" displays until pattern printing is finished. Do not start any other
operation until printing stops.
SM
CÓPIA NÃO CONTROLADA
4-51
CÓPIA NÃO CONTROLADA
Image Correction
J012/J013/J014