Ricoh J012 Service Manual page 174

Display Summary
Menu/Menu Item
Engine Settings?
1 Paper Tray Prty?
2 List/Test Print?
3 Pg-dry Prt Delay?
4 Auto Continue?
J012/J013/J014
CÓPIA NÃO CONTROLADA
Scan=000000
Full Color=000000
B&W=000000
Level Color=000000
Print Counter?
Specifies priority paper tray selection for paper feed. (Tray
1, Tray 2, Bypass). Default: Tray 1
Note: This function is not available until either or both
options (Tray 2 or Multi Bypass Tray) have been installed.
Prints the System Summary that shows how the printer is
currently configured for operation.
Configuration Page. Prints the System Summary.
PCL Configuration. Available for the J014 only.
Sets longer intervals between printed pages to allow more
time for ink to dry and prevent duplex-printed pages and
transparences from sticking together.
Duplex Unit. On/Off. Default: Off. Select "On" then [ ]
or [ ] to select the time interval: 1, 2, 5, 10, 15, 20 sec.
Trans. On/Off. Default: Off. Select "On" then [ ] or [ ]
to select the time interval: 1, 2, 5, or 10 min.
Determines how the machine handles a print job when the
specified paper size and type is not loaded in the tray.
On/Off/Immediate. Default: Off
Off: The job does not print if the specified paper size/type is
not loaded in the tray. The job will execute once the
specified paper size/type is loaded.
On: The job prints even if the specified paper size/type is
not loaded in the tray.
4-8
CÓPIA NÃO CONTROLADA
Function
SM