Ricoh J012 Service Manual page 170

Display Summary
6 Daylight-saving?
7 Country?
8 Func. Priority?
9 Parameter Setting
Tray Paper Setting?
The tray paper settings must be done for Tray 1 (standard) and both options, Tray 2, Multi
Bypass Tray. These settings are required because there are no sensors in this machine
that can automatically detect paper size.
1 Tray1?
2 Tray2?
J012/J013/J014
CÓPIA NÃO CONTROLADA
Switches the daylight saving time function on and off.
Default: On
The date and time for switching from standard time to
daylight saving time depends on which country is selected
for "Country" under these "System Settings." (See below.)
Note: This feature is not available in come countries.
Allows country selection.
Default: USA
The country selection automatically affects other settings
such as "Daylight-saving", "Print Fax Header", and "Auto
Reset." For more details, please refer to the Operating
Instructions.
Note: A message prompts you to cycle the machine off/on.
The machine must by cycled off/on to enable the new
setting.
Specifies the operation mode (Fax or Copy) immediately
after the machine is turned on and after the Auto Reset
Time elapses.
Default: Copy
This feature presents a selection of bit switch settings that
allow you to perform software settings.
Note: The "Tray2" and "Bypass" items do not appear until
after these options have been installed.
Paper Type?. Selects the paper type for Tray 1
(Standard), the Tray 2 (option), and Multi Bypass Tray
(option).
Default: Plain
4-4
CÓPIA NÃO CONTROLADA
SM