Installation Notes - Ricoh J012 Service Manual

Installation Procedure
Online User Guide
Only the J013 and J014 support the LAN-Fax driver and the Device Setting Utility.
You must log on as a user with administrator rights to do this installation for
Windows 2000, Windows XP, or Windows Server 2003
1. Make sure that the machine is off.
2. If the computer is off, turn it on to start Windows.
3. Mount the "Drivers, Manual & Utilities" CD-ROM in the CD-ROM drive.
4. If any other applications are running, close them.
5. If the "Add New Hardware Wizard" appears, click [Cancel] and make sure that the
machine power is off.
6. Select an language for the interface and click [OK].
7. Click [Quick Install for USB].
8. Read the license agreement, then click [I accept the agreement]> [Next].
9. Confirm that the machine power is off, then click [Next].
You are prompted to once again confirm that the machine power is off.
10. Make sure the machine power is off, then click [Next].
You should see the "Install Driver" window for "Auto Detect USB Port." Follow the
instructions.
11. Press the [Power] key.
12. The installation begins.
If the computer connection was not confirmed, do the port settings again after
installation is completed.
If you see one of these messages or dialog boxes, refer to the "Installation Notes"
below:
Digital Signature Not Found
Found New Hardware Wizard
Hardware Installation
13. Follow the instructions on the screen to complete the installation.

Installation Notes

If the message "Digital Signature Not Found" appears or if the "Software Installation" or
"Hardware Installation" dialog box opens, just click [Yes] or [Continue Anyway] to continue
with the installation.
If the "Found New Hardware" dialog box opens:
1. Click [Install from a list or specific location...] then click [Next].
2. Click [Include this location in the search] then click [Browse].
J012/J013/J014
CÓPIA NÃO CONTROLADA
1-26
CÓPIA NÃO CONTROLADA
SM