5. SERVICE TABLES
5.1 BEFORE YOU BEGIN
There are two service modes for this machine:
Service Mode. This mode is menu driven and includes important items for adjustments
(CCD, ADF., scanner, etc.) as well as other important functions such as displaying the
firmware version number, clearing the memory, printing reports, and so on.
SP mode. Consists of SP codes SP1000 to SP7532. These are printer engine SP
adjustments, primarily but not exclusively used by designers for machine adjustments.
5.1.1
SERVICE MODE
Entering/Exiting Service Mode
To enter Service Mode:
1.
[Menu]> [#]> [*]> [Yes]
SERVICE MODE
1. SERVICE'S CHOICE
2.
Use [ ] or [ ] to display the item to select.
SM
CÓPIA NÃO CONTROLADA
5-1
CÓPIA NÃO CONTROLADA
Before You Begin
J012/J013/J014