Ricoh J012 Service Manual page 245

DTMF LOW FREQ. LEVEL
DTM low frequency level (transmission level of low DTMF TX)
Note: For the fax model only.
[0 to -15/-11/1 dBm]
CNG LEVEL
CNT transmission level.
Note: For the fax model only.
[-15 to -4/-10/1 dBm]
CED LEVEL
CED transmission level.
Note: For the fax model only.
[-15 to -4/-10/1 dBm]
ECM MODE
Switches ECM mode off and on. Default: On
Note: For the fax model only.
ON/OFF
ON: When an error occurs during transmission, the frame where the error occurred is
resent automatically.
OFF: Errors are ignored during transmission.
CODING SCHEME
Sets the compression mode for fax transmission. Choose the compression method from
among the following: JBIG (best, most complex), MMR, MR, MH (simplest).
Default: JBIG
Note: For the fax model only
SM
CÓPIA NÃO CONTROLADA
Dial Tone Multi Frequency
5-11
CÓPIA NÃO CONTROLADA
Service Mode
J012/J013/J014