Jam Codes; Original Feed Jam - Ricoh J012 Service Manual

SC Error Codes
999 A Maintenance Stepping Motor Out of Home Position
The maintenance motor HP
sensor failed to detect the
motor at the home position.
4.4.4

JAM CODES

Here is a list of jam codes and what they mean.

Original Feed Jam

Original Feed Jam
Jam An original failed to feed in the ADF.
Cause:
Problem Site
1.
2.
Action
3.
J012/J013/J014
CÓPIA NÃO CONTROLADA
Original lag jam. The leading edge of the original failed to arrive
at one of the sensors because the feed roller is slipping against
the paper, or the original has wrapped around the paper feed
mechanism.
1) Registration sensor, 2) Duplex sensor, or 3) Paper feed clutch
timing sensor in the ADF.
Remove all the originals from the ADF.
Open the ADF. and turn the dial to free the jammed original.
Open the top cover of the ADF. and remove the jammed original
or paper scraps.
4-28
CÓPIA NÃO CONTROLADA
Maintenance HP sensor connector
loose, broken, or defective
Maintenance motor connector loose,
broken, or defective
Movable Feeder connector loose,
broken.
SM