Sensors; Vertical Encoder Sensor - Ricoh J012 Service Manual

Sensors

3.8 SENSORS
3.8.1

VERTICAL ENCODER SENSOR

Preparation:
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) left cover (
Work carefully to avoid bending or scratching the edge of the vertical encoder
sensor wheel.
1. Release the scanner unit power harness [1] (
2. Remove screws [2], [3], [4], [5] on the side of the vertical stay ( x4).
3. Remove the screw [6] on top of the vertical stay ( x1).
4. Remove screws [7], [8] ( x2).
J012/J013/J014
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
x1).
3-52
CÓPIA NÃO CONTROLADA
3.2.8, 3.2.12)
SM