Ricoh J012 Service Manual page 169

Menu/Menu Item
3 Auto Off Timer?
4 Language?
5 Adjust Sound Vol?
SM
CÓPIA NÃO CONTROLADA
The machine is set to return to the standby mode from the
menu mode if a key is not pressed within 60 sec. This
ensures that the machine is always ready for operation.
Default: OFF (ON = 60 min.)
Notes
If this item is switched off, the machine will not reset
automatically to standby mode. This can be convenient
when doing long setup or testing procedures during
installation and troubleshooting.
After the installation or troubleshooting session is
completed, switch this feature on again.
Allows selection of 1 of 10 languages. The selected
language is used for the menus, prompts, and messages
on the operation panel display of the machine.
Default: English
German, French, Italian, Dutch, Swedish, Norwegian,
Danish, Spanish, Portuguese
Note: A message prompts you to cycle the machine off/on.
The machine must by cycled off/on to enable the new
setting.
The sound level can be adjusted for key presses, alerts,
and speaker volume during on-hook mode.
Key. Adjusts the volume of the beep that sounds when
a key is pressed, or an original is loaded in the ARDF.
Alert. Adjusts the volume of the beep that sounds
when a transmission error or other error occurs.
Line Vol. Adjusts the volume of the speaker used
during on-hook mode with the fax.
4-3
CÓPIA NÃO CONTROLADA
Display Summary
Function
J012/J013/J014