Charge Width Setting Mj1: Simplex (Dfu); Suction Vents - Ricoh J012 Service Manual

SP Mode Service Tables

Suction Vents

1017 PRGPOS:R
Use this SP to adjust the venting position of the right air vent. Do this SP after it
has been determined that the ink is not venting at the center of the right ink
suction vent.
[-128 to +128/FA/1/0.1 mm]
1018 PRGPORS:L
Use this SP to adjust the venting position of the left ink suction vent. (Do this SP
after it has been determined that the ink is not venting at the center of the left ink
suction vent.
[-128 to +128/FA/1/0.1 mm]

Charge Width Setting Mj1: Simplex (DFU)

1100 CHG:W1:EDGE:1
1102 CHG:W1:EDGE:2
1104 CHG:W1:EDGE:3
1106 CHG:W1:EDGE:4
1101 CHG:W1:MIDLL:1
1103 CHG:W1:MIDLL:2
1105 CHG:W1:MIDL:3
1107 CHG:W1:MIDL:4
J012/J013/J014
CÓPIA NÃO CONTROLADA
Adjust Position of Right Suction Vent DFU
Adjust Position of Left Suction Vent DFU
LE/TE: Mj1: ID1
LE/TE: Mj1: ID2
LE/TE: Mj1: ID3
LE/TE: Mj1: ID4
MIDLL: Mj1: ID1
MIDLL: Mj1: ID2
MIDL: Mj1: ID3
MIDL: Mj1: ID4
5-50
CÓPIA NÃO CONTROLADA
SM