Ricoh J012 Service Manual page 129

Rev. 09/09/2009
6. Pull the NVRAM from the control board removed from the printer.
7. Install the NVRAM on the new control board.
8. Attach the NVRAM so the curvature of the white line on the board
curvature of the indentation
replaced with a new one, see Technical Service Bulletin J012/J013/J014 – 021 NVRAM
CAN NOT BE REPLACED.
SM
CÓPIA NÃO CONTROLADA
on the NVRAM chip. NOTE: The NVRAM can not be
3-41
CÓPIA NÃO CONTROLADA
Boards
matches the
J012/J013/J014