Front Fan - Ricoh J012 Service Manual

3.7.5

FRONT FAN

Preparation
Remove platen or ADF. (
Raise the scanner unit to full upright. (
Remove: (1) paper cassette, (2) paper output tray, (3) right front cover, (4) right cover.
( 3.2.8, 3.2.9, 3.2.10)
1. Pull the fan connector harness [1] out of its L-clamp.
2. Disconnect the fan harness connector [2] (
3. Remove fan bracket screws [3] and [4] then remove the fan ( x2).
SM
CÓPIA NÃO CONTROLADA
3.2.4, 3.2.5)
3.2.7)
x1).
3-51
CÓPIA NÃO CONTROLADA
Motors
J012/J013/J014