Ricoh J012 Service Manual page 202

SC Error Codes
1.
2.
3.
4.
⇒
Jam 15 Abnormal Paper Transport Sequence
Message: Paper Misfeed: Inverter Guide Plate
The registration sensors detected the paper before the PFU relay sensor
Jam
signaled detection of the leading edge.
Cause:
Problem Site
Perform check, take action in this order:
1.
Action
2.
3.
J012/J013/J014
CÓPIA NÃO CONTROLADA
Clean the horizontal encoder film strip.
Inspect the path of the carriage and remove any jammed paper, paper
scraps, or other objects.
Replace the horizontal encoder film strip.
Replace the CTL board.
The registration sensor signals did not change.
1st Registration sensor
2nd Registration sensor
Clean the transfer belt.
Replace the 1st Registration sensor.
Replace the 2nd Registration sensor.
4-36
CÓPIA NÃO CONTROLADA
Rev. 01/2008
SM