Subaru 2002 IMPREZA Service Manual page 260

MECHANICAL
6) Install the intake manifold. <Ref. to FU-19, IN-
STALLATION, Intake Manifold.> or <Ref. to FU(w/
oOBD)-20, INSTALLATION, Intake Manifold.>
7) Install the camshaft sprocket. <Ref. to ME-54,
INSTALLATION, Camshaft Sprocket.>
8) Install the timing belt assembly. <Ref. to ME-50,
INSTALLATION, Timing Belt Assembly.>
9) Install the belt cover. <Ref. to ME-48, INSTAL-
LATION, Belt Cover.>
10) Install the crankshaft pulley. <Ref. to ME-46,
INSTALLATION, Crankshaft Pulley.>
11) Install the V-belt. <Ref. to ME-44, INSTALLA-
TION, V-belt.>
C: DISASSEMBLY
1) Place the cylinder head on ST.
ST 498267800 CYLINDER HEAD TABLE
2) Set the ST on valve spring. Compress the valve
spring, and then remove the valve spring retainer
key. Remove each valve and valve spring.
ST 499718000 VALVE SPRING REMOVER
CAUTION:
• Mark each valve to prevent confusion.
• Use extreme care not to damage the lips of in-
take valve oil seals and exhaust valve oil seals.
CYLINDER HEAD ASSEMBLY
B2M2630A
ME-64