Subaru 2002 IMPREZA Service Manual page 397

E: INSPECTION
1. ACCELERATOR PEDAL
Lightly move the pedal pad in lateral direction to en-
sure that pedal deflection is in specified range.
CAUTION:
If excessive deflection is noted, replace the
bushing and clip with new ones.
Deflection of accelerator pedal:
Service limit
5.0 mm (0.197 in) or less
2. KICK-DOWN SWITCH
If the kick-down switch does not operate properly
(or if it does not stop at the specified position), re-
place with a new one.
Specified position: A
+1.5 +0.059
2 / mm (0.079
0
ACCELERATOR PEDAL
G4M0333
/ in)
0
B4M0155A
F: ADJUSTMENT
1) Check the pedal stroke and free play by operat-
ing accelerator pedal by hand.
If it is not within specified value, adjust it by turning
the nut connecting the accelerator cable to throttle
body.
Free play at pedal pad: L
1 — 4 mm (0.04 — 0.16 in)
Stroke at pedal pad: A
52 — 57 mm (2.05 — 2.24 in)
(A) Accelerator pedal
(B) Accelerator pedal bracket
Accelerator cable lock nut tightening torque:
12 N·m (1.2 kgf-m, 9 ft-lb)
SP-7
SPEED CONTROL SYSTEMS
B4M1739A