Subaru 2002 IMPREZA Service Manual page 342

COOLING
2) Install the belt cover No. 2 (LH).
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
3) Install the tensioner bracket.
Tightening torque:
25 N·m (2.5 kgf-m, 18.1 ft-lb)
4) Install the camshaft sprockets (LH) by using ST.
ST 18231AA010 CAMSHAFT SPROCKET
WRENCH
NOTE:
Also the CAMSHAFT SPROCKET WRENCH
(499207100) can be used.
Tightening torque:
78 N·m (8.0 kgf-m, 57.9 ft-lb)
WATER PUMP
5) Install the belt idler No. 2.
Tightening torque:
39 N·m (4.0 kgf-m, 28.9 ft-lb)
B2M2040
6) Install the automatic belt tension adjuster which
tension rod is holded with pin. <Ref. to ME-50, AU-
TOMATIC BELT TENSION ADJUSTER ASSEM-
BLY AND BELT IDLER, INSTALLATION, Timing
Belt Assembly.>
7) Install the timing belt. <Ref. to ME-51, TIMING
BELT, INSTALLATION, Timing Belt Assembly.>
8) Install the V-belts. <Ref. to ME-44, INSTALLA-
TION, V-belt.>
9) Install the radiator main fan and sub fan motor
assemblies. <Ref. to CO-49, INSTALLATION, Ra-
diator Main Fan and Fan Motor.> and <Ref. to CO-
50, INSTALLATION, Radiator Sub Fan and Fan
Motor.>
H2M2380
10) Install the reservoir tank.
11) Connect the over flow hose.
B2M2039A
CO-32
S2M0024
B2M2926
B2M2925