DIAGNOSTICS FOR ENGINE STARTING FAILURE
ENGINE (DIAGNOSTICS)
Step
10
CHECK INPUT VOLTAGE OF ECM.
1)Connect the main relay connector.
2)Turn the ignition switch to ON.
3)Measure the voltage between ECM connec-
tor and chassis ground.
Connector & terminal
(B136) No. 1 (+) — Chassis ground (–):
(B136) No. 2 (+) — Chassis ground (–):
Check
Is the voltage more than 10 V? Check the ignition
EN-70
Yes
Repair the open or
control system.
ground short cir-
<Ref. to EN-72,
cuit in harness
IGNITION CON-
between ECM
TROL SYSTEM,
connector and
Diagnostics for
main relay con-
Engine Starting
nector.
Failure.>
No