Subaru 2002 IMPREZA Service Manual page 352

COOLING
13) Remove the V-belt covers.
14) Disconnect the radiator inlet hose (A) and wa-
ter tank hose (B) from radiator.
15) Remove the radiator upper brackets.
16) While slightly lifting the radiator, slide it to left.
17) Lift the radiator up and away from vehicle.
RADIATOR
B: INSTALLATION
1. NON-TURBO MODEL
1) Attach the radiator mounting cushions to holes
on the vehicle.
EN0048
2) Install the radiator while fitting radiator pins to
(A)
cushions.
NOTE:
Fit pins on the lower side of radiator into cushions
on body side.
EN0109
(B)
3) Install the radiator brackets and tighten bolts.
Tightening torque:
EN0110
18 N·m (1.8 kgf-m, 13.0 ft-lb)
EN0035
CO-42
B2M2934
B2M2933
B2M2931