IGNITION
3. Ignition Coil and Ignitor As-
sembly
A: REMOVAL
1) Disconnect the ground cable from battery.
2) Disconnect the spark plug cords from ignition
coil and ignitor assembly.
• 1600 cc MODEL
• 2000 cc and 2500 cc MODEL
3) Disconnect the connector from ignition coil and
ignitor assembly.
IGNITION COIL AND IGNITOR ASSEMBLY
G6M0095
EN1040
S6M0373
4) Remove the ignition coil and ignitor assembly.
• 1600 cc MODEL
• 2000 cc and 2500 cc MODEL
B: INSTALLATION
1) Install in the reverse order of removal.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
CAUTION:
Be sure to connect wires to their proper posi-
tions. Failure to do so will damage unit.
• 1600 cc MODEL
IG-8
EN1044
B6M0930
EN1044