Subaru 2002 IMPREZA Service Manual page 419

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

Assemble in the reverse order of disassembly. Do

the following:

1) Carefully assemble all parts in the order of as-

sembly and occasionally inspect nothing has been

2) When installing the shaft assembly to front

bracket, be careful of the following.

• Lever direction

• Internal gear position

• Packing position

3) When installing the yoke to the front bracket,

match bolt hole.

4) When installing the rear bracket, match brush

holder and yoke's groove.

5) When installing the switch assembly, catch

plunger protrusion to lever edge.

6) Apply grease to the following parts during as-

• Front and rear bracket sleeve bearing

• Armature shaft gear

• Outer periphery of plunger

• Mating surface of plunger and lever

• Gear shaft splines

• Mating surface of lever and clutch

• Ball at the armature shaft end

• Internal and planetary gears

7) After assembling parts correctly, make sure the

starter operates properly.

STARTING/CHARGING SYSTEMS

(A) Bolt hole

Chapters

Table of Contents

2001 impreza