Subaru 2002 IMPREZA Service Manual page 380

LUBRICATION
5. Oil Pan and Strainer
A: REMOVAL
1) Set the vehicle on lift arms.
2) Remove the front wheels.
3) Disconnect the ground cable from battery.
4) Remove the air intake duct and air cleaner case.
(Non-Turbo model)
<Ref. to IN-7, REMOVAL, Air Intake Duct.> and
<Ref. to IN-6, REMOVAL, Air Cleaner Case.>
5) Disconnect the connector from mass air flow
sensor. (Turbo model)
6) Remove the air intake boot and air cleaner upper
cover. (Turbo model)
7) Remove the intercooler (Turbo model) <Ref. to
IN(TURBO)-10, REMOVAL, Intercooler.>
OIL PAN AND STRAINER
8) Remove the pitching stopper.
9) Remove the radiator upper brackets.
• Non-Turbo MODEL
G6M0095
• Turbo MODEL
EN0031
10) Support the engine with a lifting device and
wire ropes.
EN0032
11) Lift-up the vehicle.
CAUTION:
At this time, raise up the wire ropes.
12) Remove the under cover.
LU-16
H3M1839
B2M2931
EN0035
G2M0297