Subaru 2002 IMPREZA Service Manual page 425

Hide thumbs Also See for 2002 IMPREZA:

Table of Contents

C: DISASSEMBLY

1) Heat the portion (A) of rear cover to 50°C

(122°F) with heater drier.

2) Remove the four through bolts. Then insert the

tip of a flat-head screwdriver into the gap between

stator core and front bracket. Pry them apart to dis-

(A) Screwdriver

3) Hold the rotor with a vise and remove pulley nut.

When holding the rotor with vise, insert alumi-

num plates or wood pieces on the contact sur-

faces of vise to prevent rotor from damage.

4) Unsolder connection between rectifier and stator

coil to remove the stator coil.

Finish the work rapidly (less than 3 seconds)

because the rectifier cannot withstand heat

5) Remove the screws which secure IC regulator to

rear cover, and then unsolder connection between

IC regulator and rectifier to remove the IC regula-

STARTING/CHARGING SYSTEMS

(A) Front bracket

Chapters

Table of Contents

2001 impreza