Subaru 2002 IMPREZA Service Manual page 399

ACCELERATOR CONTROL CABLE
SPEED CONTROL SYSTEMS
3. Accelerator Control Cable
A: REMOVAL
1) Remove the accelerator pedal. <Ref. to SP-4,
REMOVAL, Accelerator Pedal.>
2) Separate the accelerator cable and accelerator
pedal.
B: INSTALLATION
1) Install in the reverse order of removal.
CAUTION:
• If the cable clamp is damaged, replace it with
a new one.
• Never fail to cover the outer cable end with
boot.
• Be careful not to kink the accelerator cable.
• Do not apply grease to the throttle cable on
engine side.
2) Adjustment after pedal installation. <Ref. to SP-
5, INSTALLATION, Accelerator Pedal.>
C: INSPECTION
1) Make sure the inner cable is not twisted or
frayed.
2) Make sure the outer cable is not cracked.
SP-9