Subaru 2002 IMPREZA Service Manual page 382

LUBRICATION
B: INSTALLATION
CAUTION:
Before installing the oil pan, clean sealant from
oil pan and engine block.
1) Install the baffle plate.
Tightening torque:
6.4 N·m (0.65 kgf-m, 4.7 ft-lb)
2) Install the oil strainer onto baffle plate.
NOTE:
Replace the O-ring with a new one.
Tightening torque:
10 N·m (1.0 kgf-m, 7.2 ft-lb)
3) Apply fluid packing to the mating surfaces and
install oil pan.
Fluid packing:
THREE BOND 1215 or equivalent
OIL PAN AND STRAINER
4) Tighten the bolts which install the oil pan onto
engine block.
Tightening torque:
5 N·m (0.5 kgf-m, 3.6 ft-lb)
• Non-Turbo MODEL
• Turbo MODEL
S2M0309
5) Lower the engine onto front crossmember.
6) Tighten the nuts which install front cushion rub-
ber onto front crossmember.
Tightening torque:
69 N·m (7.0 kgf-m, 50.9 ft-lb)
S2M0238
S2M1833A
LU-18
EN0040
EN0041
S2M1831