Subaru 2002 IMPREZA Service Manual page 396

SPEED CONTROL SYSTEMS
C: DISASSEMBLY
1) Remove the clip, and then remove the accelera-
tor pedal from bracket.
2) Pull out the spring pin, and then remove the ac-
celerator pedal from accelerator pedal lever.
• LHD MODEL
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
ACCELERATOR PEDAL
• RHD MODEL
EN0926
D: ASSEMBLY
Assemble in the reverse order of disassembly.
CAUTION:
Clean and apply grease to the portions indicat-
ed in the figure.
Grease:
Nigtight — LYW No.2 or equivalent
SP-6
(A) Accelerator bracket
(B) Stopper
(C) Bushing
(D) Clip
(E) Accelerator spring
(F) Accelerator pedal spring
(G) Accelerator pedal lever
(H) Spring pin
(I) Accelerator pedal
(J) Kick-down switch (AT model)
EN1494