Subaru 2002 IMPREZA Service Manual page 381

13) Drain the engine oil.
Set a container under the vehicle, and remove the
drain plug from oil pan.
• Non-Turbo MODEL
• Turbo MODEL
(A)
(B)
(A) Gasket
(B) Drain plug
14) Remove the front and center exhaust pipes.
(Non-Turbo model) <Ref. to EX-7, REMOVAL,
Front Exhaust Pipe.> or <Ref. to EX(w/oOBD)-9,
REMOVAL, Front Exhaust Pipe.>
15) Remove the nuts which install front cushion
rubber onto front crossmember.
16) Remove the bolts which install oil pan on cylin-
der block while raising up engine.
OIL PAN AND STRAINER
17) Insert the oil pan cutter blade between the cyl-
inder block-to-oil pan clearance.
CAUTION:
Do not use a screwdriver or similar tool in place
of oil pan cutter.
• Non-Turbo MODEL
(A)
(B)
EN0009
• Turbo MODEL
EN0010
18) Remove the oil strainer.
19) Remove the baffle plate.
S2M1831
LU-17
LUBRICATION
EN0040
EN0041
S2M0238
S2M0309