Subaru 2002 IMPREZA Service Manual page 383

7) Install the front and center exhaust pipes. (Non-
Turbo model)
<Ref. to EX-8, INSTALLATION, Front Exhaust
Pipe.> or <Ref. to EX(w/oOBD)-10, INSTALLA-
TION, Front Exhaust Pipe.>
NOTE:
Always use new gaskets.
8) Install the under cover.
9) Lower the vehicle.
CAUTION:
At this time, lower the lifting device and release
steel cables.
10) Remove the lifting device and steel cables.
11) Install the pitching stopper.
Tightening torque:
T1: 50 N·m (5.1 kgf-m, 36.9 ft-lb)
T2: 58 N·m (5.9 kgf-m, 42.8 ft-lb)
OIL PAN AND STRAINER
12) Install the radiator upper brackets.
• Non-Turbo MODEL
• Turbo MODEL
B2M3200
13) Install the air intake duct and air cleaner case.
(Non-Turbo model)
<Ref. to IN-6, INSTALLATION, Air Cleaner Case.>
and <Ref. to IN-7, INSTALLATION, Air Intake
Duct.>
14) Install the intercooler. (Turbo model) <Ref. to
IN(TURBO)-11, INSTALLATION, Intercooler.>
15) Install the air intake boot and air cleaner upper
cover. (Turbo model)
G2M0297
H3M1839A
LU-19
LUBRICATION
B2M2931
EN0035
EN0032