Subaru 2002 IMPREZA Service Manual page 354

COOLING
11) Connect the radiator outlet hose.
12) Install the under cover.
13) Lower the vehicle.
14) Connect the battery ground cable to battery.
15) Fill engine coolant. <Ref. to CO-26, FILLING
OF ENGINE COOLANT, REPLACEMENT, Engine
Coolant.>
16) Check the ATF level. <Ref. to AT-9, INSPEC-
TION, Automatic Transmission Fluid.>
2. TURBO MODEL
1) Attach the radiator mounting cushions to holes
on the vehicle.
RADIATOR
2) Install the radiator brackets, and then tighten the
bolts.
Tightening torque:
18 N·m (1.8 kgf-m, 13.0 ft-lb)
EN0112
3) Connect the radiator inlet hose (A) and water
tank hose (B).
G6M0095
4) Install the reservoir tank.
Tightening torque:
4.9 N·m (0.50 kgf-m, 3.6 ft-lb)
B2M2934
CO-44
EN0035
(A)
EN0109
(B)
EN0110
S2M0934