Task 12: Configure the product to the management application
Figure 30
62
SAN32M-2 Installation and Service Manual
To manage a new product, it must be identified to and discovered by
the SAN management application. To identify the product:
1. At the SANavigator or EFCM main window, select Setup from the
Discover menu. The Discover Setup dialog box displays.
2. Click Add. The Address Properties dialog box displays with the IP
Address page open by default
Address Properties dialog box (IP Address page)
3. Type a product description in the Description field.
4. Type the product IP address (determined by the customer) in the
IP Address field.
5. Type the product subnet mask (determined by the customer) in
the Subnet Mask field.
6. Click OK to save the entered information and define the switch to
the SAN management application. Close all dialog boxes and
return to the SANavigator or EFCM main window.
(Figure
30).